Sushil Nahar

Layout Engineer @NXP Semiconductors

Bangalore, IN

Total 13 years of industrial experience• Worked on Analog, RF and mixed signal layout.• Worked in TSMC Finfet16nm, GF22FDX, TSMC28nm, TSMC40nm, GF40nm,130nm, 180nm, 165nm technologies• Worked in CMOS14 and ABCD9 technology of NXP Semiconductor for Mobile and Automotive Industry• Worked for very high voltage devices upto voltage >40 volts used in Automotive using SOI process and ABCD9 technology. High Voltage DRCs and Antenna were major challenges.• Good working Knowledge of Dnwell/BULK and SOI, FDSOI processes• Worked for high speed and RF Devices.• Familiar with LVS, DRC, High Voltage DRC, ERC, Antenna verifications with PVS, Callibre and assura• Proficient in Floorplanning, placement, routing, understanding of design rules, device matching, isolation Techniques and minimization of parasitic etc.• Taken into consideration IR Drop, Matching, Shielding, Electromigration, Latch Up, Antenna, Crosstalk, STI effect, Well proximity• Taken care of Finfet Technology effects like Coloring/Double Patterning, MBE, Self Heating, Hot Node Sharing, EMIR• Worked on all Analog modules Comparator PLL- VCO, Charge pump Flash ADC, SAR ADC, DAC, Clock Generator Bandgap ISR, Regulators, LDOs High Voltage power Amplifiers PMU, DCDC(Buck, Boost) FROs CANFD Transceiver Drivers FIFO, Latches High speed series circuit of Opamp, Bias circuit, Latch, Current Mirror TX, RX, LNA, MIXER, IFAMP, IQ Generator, Serializer