Saleesh Kumar

About Saleesh Kumar

Review of credentials would confirm my association as CSWIP Level 3 (3.2.2.), CSWIP AUT Data Interpreter, PAUT, TOFD, BGAS Grade 2 & AWS CWI Certified Welding, QMS Lead Auditor, offering performance driven experience of over 14 years’ in the areas of Inspection, Welding Engineering, Operations Management, Welding & Fitting, NDT, Site Supervision, Quality Control, Training & technical support etc. ACADEMIA • Diploma in Mechanical Engineering International Technical Certifications • CSWIP 3.2.2 - SENIOR WELDING INSPECTOR -(CSWIP CERT NO - )- TWI-UK EXPIRY : 20••••18 • BGAS- CSWIP PAINTING INSPECTOR Grade-2 -(BG-633702)- TWI - UK EXPIRY : 12••••17 • CSWIP AUT DATA INTERPRETATION ( TWI-UK) • PCN LEVEL - 2 ULTRA SONIC TESTING ( 3.1 & 3.2 )- BINDT- UK • PCN LEVEL - 2 MAGNETIC PARTICLE TESTING ( MT )- BINDT- UK • ASNT LEVEL-2 in RT, UT, MT, PT & RTFI • BOSIET ( OPITO Approved ) BOSIET/FOET (OPITO approved) – Safety Induction, Emergency First Aid, Fire Fighting & Self Rescue, Helicopter Safety & Escape (HUET) & EBS - OPITO, Certificate No # 64••••••••65, • Basic H2S Training ( OPITO APPROVED ) Cert-47520, EXPIRY : 02••••16 • Seaman Book Training Attended • Certified in attended certification preparatory seminar for WPS, PQR, WPQ Covering • Welding ( SMAW, GMAW & GTAW,SAW) • Mechanical Testing • Radio graphic Testing Interpretation Computer Proficiency: Microsoft Office, Windows and Internet Applications As a QA/QC Welding Professional, I am competent in field of Welding Inspections. Deft in handling QA/QC Inspection, Welding, Piping, Pipeline, Inspection of pressure vessels. Undergone & handled many prestigious projects. Good exposure to international codes and standards with knowledge on SMAW, GTAW,GMAW and FCAW with all positions. A glance through my resume, attached along, shall familiarize you with my credentials. I am confident of fitting in the slot as well as in the team.

Experience

1. Senior Site Qc Engineer Quality Lead

   bp

   Apr 2022 — Present

   The Tortue field is located approximately 120km offshore the coast of Senegal\\\\nand Mauritania straddling the maritime border, in 2,850m water depth. The subsea\\\\nsystem includes a total of 4 wells clustered at one drill centre. The production system ties back approximately 70km to a spread moored FPSO positioned at the shelf edge in 100-120m water depth. The FPSO undertakes gas pre-treatment before exporting the gas 35km to a nearshore hub and terminal facility where the gas is liquefied and offloaded to LNG carriers.\\\\n\\\\n\\\\n\\\\nProject Scope :\\\\n• 30” x 21.3 and 25.4mm, 40km Carbon steel GAS export pipeline (C-Mn DNVGL SAW 450 Material)\\\\n• 6.675”x 14.27mm, 110km Pipeline (Material -(Material- DNVGL SMLS 450 SDUPF)\\\\n• 16.75”x 34mm, 158km Pipeline (Material -(Material- DNVGL SMLS 450 SDUPF)\\\\n• 10.75“ x (19+3) 15 km Pipeline (Material- DNVGL SMLS 450 + 3mm 625 CRA – ( Metallurgical Bonded clad)\\\\n• Installation of Risers and riser structures.\\\\n Inspect and verify the incoming materials are as per project specifications and review MTC.\\\\n Review and Verify the availability of Approved PQR, WPS’s, ITP, NDT and other project documents.\\\\n Verify the contractor/subcontractor QC Personnel qualifications meet the client specified requirements.\\\\n Review NDT Procedure, NDE personnel Qualification and Equipment register.\\\\n Verify the calibration of welding equipment’s and QC Tools.\\\\n Verify the setup of the pipe tally system ( PTS ).\\\\n Inspect the welding electrodes, storage conditions, review MTC to assure, its meet the approved WPS and qualified PQR requirements.\\\\n Witness Welder/welding operators qualification test, Interpret the AUT Results (AUT System : RTD Rotoscan ), and witness the mechanical tests. Review welder test logs, welder certificates, welder register and signed off the reports.\\\\n Review the procedure, HSS application Data sheet and Witness the PQT for coating.\\\\n Verify the absence of contamination at the pipe inner surface.\\\\n Witness the PT inspection on the CRA\\\\n \\\\n\\\\n \\\\n \\\\n\\\\n \\\\n

Education

• American Society for Nondestructive Testing ( ASNT )

  ASNT Level 2 in PT,MT,RT,UT,

  2007

• The Technical Welding Institute ( TWI ) - UK

  CSWIP 3.2.2 Senior Welding Inspector, License-77788

  2013

• The Technical Welding Institute ( TWI ) - UK

  BGAS CSWIP ( Grade-2 ), License - 63234

  2012

• American Welding Society

  American Welding Society certified welding Inspector , Certification No : 09083451

  2006

• The British Institute of Non-Destructive Testing ( BINDT ) - UK

  PCN Level - 2 Ultra sonic Testing ( 3.1 & 3.2 )

  2015

• Kerala Institute of Engineering Technology

  Diploma in Mechanical Engineering

  2001

• The British Institute of Non-Destructive Testing ( BINDT ) - UK

  PCN Level 2 Magnetic Particle Inspection (MT)

  2015

• Technical Welding Institute (TWI) - UK

  CSWIP AUT - DATA INTERPRETATION