Mohammad Pour
Process Engineer @Stantec
Signup · Get unlimited contacts
WORK HISTORY
Process Engineer @Stantec
Enhanced Bitumen Recovery Technology Pilot Project, Imperial Oil> Process engineer on a novel in-situe oil sands project that uses 90% less steam compared to traditional SAGD process and about 60% less GHG emissions. Gazifere Hydrogen Production Project, Enbridge> Design of one hydrogen producer station, and one hydrogen blending station that would inject a specified volume into the natural gas distribution system. HSR Naphtha Storage Expansion, Braya Renewables Fuels Ltd> Performed line sizing, and pump sizing to generate class 3 const estimate of new equipment/piping and required upgrades to existing facilities for storage and treatment of bbl/day heavy straight run naphtha in the hydrotreating and platformer unit to produce hydrogen rich off-gases and gasoline.Project included design considerations for receipt of feedstock and export of gasoline from/to marine vessels.
EDUCATION
University of Alberta
Master’s Degree, Chemical Engineering
Isfahan University of Technology
Bachelor’s Degree, Chemical Engineering
ABOUT MOHAMMAD POUR
8 years of process engineering, focused on process design, hydraulic modeling using AFT software, risk management, unit operation, and petrochemical products- Strong knowledge of process simulation and optimization using Aspen HYSYS and BRE ProMax- Strong knowledge about process equipment specifications, developing PFDs, P & ID’s, hydraulic design, line sizing and equipment rating, steady state and transient analysis- Passionate about new energy future, hydrogen and renewable resources
This profile is compiled from publicly available professional sources. Unifers is not affiliated with or endorsed by LinkedIn. Request removal of this profile.