Lalit Namdev

About Lalit Namdev

I am a Chemical Process Design Engineer with 4 years of experience in the Oil & Gas and Petrochemical industry, specializing in process design, simulation, safety analysis, and basic engineering package (BEP) development. I have delivered end-to-end Process Engineering deliverables, including:a). Material & Heat Balance, Stream Summariesb). Hydraulic Calculations (pump and line sizing, pressure drop, flow verification)c). Equipment & Vessel Sizingd). P & ID Development and On-Site Verificatione). PSV Scenario Analysis, Relief Load and Relief Rate Estimationf). Equipment & Instrument Datasheets (Vessels, Reactors, PSVs, Analyzers, Analyzers, etc.)g). Utility & Energy Consumption EstimationKey Expertise: Process Simulation: Proficient in PRO/II and Aspen HYSYS for steady-state simulation, material balance creation, stream summary preparation, and process optimization.Process Design: Skilled in developing PFDs & P & IDs, Vessel Sizing, Pump and Line Hydraulic Calculations, Heat & Mass Balance, and Utility Consumption Estimation.Engineering Deliverables: Hands-on experience in preparing Equipment and Instrumentation Datasheets (Vessels, Pump, Reactors, PSV, Control Valve, Level, Temperature, Flow ) and working on Basic Engineering Packages (BEP) for Aromatics Extraction (BTX) and Sustainable Aviation Fuel (SAF) technologies.Process Safety & Analysis: Knowledge of PSV Scenario Identification, Relief Load Estimation.On-Site P & ID Verification: Experience in performing detailed P & ID checks during site visits—Verifying Line Routing, Equipment Orientation, Instrumentation, Valves, Tie-Ins, and identifying discrepancies between design and actual plant layout.Start-Up & PGTR: Actively involved in Commissioning support, Plant Start-Up, and PGTR (Performance Guarantee Test Run) activities, including Troubleshooting, Parameter Fine-Tuning.

Experience

1. Process Engineer

   Sulzer

   Jan 2024 — Present · Gurugram, IN

   Worked on Aromatic Extraction Technology (BTX) using PRO/II and Aspen HYSYS, focusing on process simulation, material balance, and stream summary preparation.2. Contributed to Basic Engineering Package (BEP) deliverables including material balance, stream summaries, PFD & P & ID development, and detailed process descriptions.3. Performed vessel sizing, hydraulic calculations, and utility consumption estimations for optimized process design.4. Prepared datasheets for instrumentation, vessels, and reactors ensuring accuracy and compliance with project requirements.5. Gained hands-on experience with SAF (Sustainable Aviation Fuel) technology and its process design aspects.6. Actively involved in critical problem-solving within process simulations to ensure reliable project outcomes.7. On-Site BTX Unit P & ID check, providing detailed technical review and validation8. Involved in plant start-up and PGTR (Performance Guarantee Test Run) activities, including troubleshooting, parameter tuning.

Education

• Samrat Ashok Technological Institute

  B.E., Petrochemical Engineering