Haseeb Bhutta
Design Engineer at IBM
- Role
- Principal Design Engineer at Ibm
- Location
- Houston, TX, US
- LinkedIn followers
- 500 followers
About Haseeb Bhutta
Lead engineer for embedded designs, Flash based Storage, Power Distribution Units (PDU), KVM consoles and UPSes.
Experience
Principal Design Engineer
Feb 2013 — Present · Houston, TX, US
Hardware architect on an Ultrascale+ Zynq FPGA that utilizes DDR4, DDR3 MRAM, Gen 3/4 PCIe and NV-DDR3 (ONFI 4.0) based NAND flash devices. This is a 2.5” Flash based SSD using rigid flex PCB-Hardware architect for a SoC design that included Broadwell-DE processor with Gen 3 PCIe, DDR4, SATA and USB interfaces. Wrote Verilog code for CPLD that performed power on sequencing and acted as i2c slave. Used blind and buried vias on pcb due to space limitation on the board-Worked on the first all Flash Array design FS840. Designed and troubleshooted the Intel, Ethernet, I/O, fans and RAID complexes-Performed Power analysis of all components for 840-Worked on iSCSI card and performed bring up testing.
Education
Purdue University
BSc
1998 — 2001
Skills
- Embedded Systems
- Usb
- I2c
- C
- Scsi
- Electrical Engineering
- Ethernet
- Systems Engineering
- Arm
- Hardware Architecture
- Fpga
- Debugging
- Soc
- Pcie
- Hardware
- Product Development
- Pcb Design
- Testing
- Signal Integrity
- Microprocessors
- Sata
- Asic
- Verilog
- System Architecture
- Semiconductors
- Firmware
- Processors
- Storage
- X86
- Rtos
- Vhdl
- Microcontrollers
- Embedded Software
- Electronics
- Troubleshooting
- Device Drivers
- Perl
- Shell Scripting
- Computer Architecture
Find verified contacts for anyone on LinkedIn
Unifers gives sales teams verified emails and direct dials, enriched profiles, and outreach that lands in the inbox.
Free plan included · No credit card required
This profile is compiled from publicly available professional sources. Unifers is not affiliated with or endorsed by LinkedIn. Request removal of this profile.