Anton Kazakov

About Anton Kazakov

Experienced and outcome-driven engineer with a diverse range of skills spanning construction management, manufacturing, automotive, and transportation industries. Proficient in operating, maintaining, and repairing various systems, including plants, electrical, air, and water systems, building automation controls, and heavy hydraulic equipment essential for delivering necessary services. Additionally, I have extensive expertise in Special Inspections, having developed procedures and contributed to obtaining registration of Special Inspection Agency (SIA) certification . Notably, I am highly self-reliant, capable of working with no supervision, and I directly report to the Vice President and President of the company.

Experience

1. Senior MEP Construction Management Inspector

   ZI Engineering

   May 2026 — Present · Staten Island, NY

   NYC DEP / AECOM: Port Richmond Port Richmond WRRF. Supporting NYC Department of Environmental Protection (“NYC DEP”) Port Richmond Wastewater Resource Recovery Facility Headworks Improvements projects under AECOM construction management services. Perform field inspections of mechanical, electrical, plumbing, HVAC, and process-related systems at water pollution control / wastewater resource recovery facility, pump stations, and related DEP infrastructure. Inspect installation, repair, rehabilitation, and replacement work involving pumps, valves, piping, ductwork, HVAC equipment, ventilation systems, plumbing systems, drainage, electrical distribution, lighting, lightning protection, panels, conduits, controls, instrumentation, and related facility components. Review contractor work for compliance with contract drawings, specifications, NYC DEP standards, applicable NYC codes, safety requirements, and industry best practices. Monitor construction activities within active wastewater treatment environments, including coordination around operating plant systems, confined or restricted work areas, equipment rooms, process areas, utility spaces, and occupied facility zones. Coordinate with resident engineers, construction managers, contractors, DEP representatives to identify field issues, verify work progress, document deficiencies, and support timely resolution of construction conflicts. Prepare daily inspection reports, field notes, photographic documentation, quantity records, and nonconformance observations to support project documentation and construction administration. Assist with review of contractor submittals, RFIs, change-related field conditions, as-built information, testing activities, equipment start-up. Verify that MEP work is performed safely, accurately, and in accordance with approved plans while supporting DEP’s goals for operational continuity, regulatory compliance, facility reliability, and long-term state of good repair.

2. Senior Mechanical Engineer

   ZI Engineering

   Sep 2020 — Present · New York City Metropolitan Area

   Assisted the field teams from the main office in preparing various change orders including detailed worksheets for calculation of daily manpower, equipment, and material. This data was obtained from inspector’s daily report. Prepared DDC Change Order forms including justification reports, time and material worksheets. Coordinated with the contractor (JR Cruz) on various items and clarifications. Prepared various reports, estimates. The projects involve construction of sewers, water main and roadways. Perform assessment of MEP system on various projects. Provide office support for ongoing projects, prepare proposals, reports, code research, develop manual for special inspections. Review various proposed mechanical designs, drawings, calculations, specifications for approval.

3. Commercial Mechanical Inspector – Special Inspections

   ZI Engineering

   Jun 2018 — Present · New York City Metropolitan Area

   Performed special inspections and witnessed field tests on New York City and Long Island construction projects in accordance with local and state regulations and standards. Prepared reports on inspection activities, filed documentation and completed required technical report forms in accordance with New York City Codes. The Port Authority of NY & NJ / AECOM / Tishman / Bureau Veritas. JFK Airport renovation project. Provide MEP Special Inspections as independent 3rd party and part of Bureau Veritas for JFK Terminal 1 project in accordance with approved design documents and standards. Communicate in writing and verbally with architects, engineers and the general public regarding inspections Investigate violations, issues and complaints and recommend actions and alternatives Record results of inspections and write reports.

4. Senior Project Manager – MNR Facilities Condition Assessments

   ZI Engineering

   May 2025 — May 2026 · New York, United States

   MTA Metro-North Railroad (MNR) | New York, NY & Upstate New York Managed facilities structural and civil condition assessment and inspection program across 27 active MTA Metro-North Railroad facilities in NYC and Upstate New York. Led multidisciplinary teams of structural and civil engineers/inspectors performing field inspections and asset evaluations. Oversaw project execution, staffing, budgeting, scheduling, and logistics coordination to maintain inspection and reporting milestones across multiple concurrent sites. Directed structural and civil condition inspections of sites, buildings, repair platforms, utility structures, drainage systems, pavements, and site infrastructure within active transportation environments. Served as primary point of contact between client representatives, engineering teams, and field personnel to ensure alignment on scope, safety requirements, and deliverables. Implemented and maintained QA/QC procedures for inspection data, documentation, and engineering assessment reports. Improved inspection and reporting workflows to increase operational efficiency across geographically dispersed facilities. Provided technical support and field guidance to resolve structural, civil, and access challenges encountered during inspections. Performed structural and civil field inspections as needed during staffing shortages to maintain project schedule commitments. Ensured compliance with site safety requirements, railroad access coordination, and active facility operational constraints. Delivered facility assessment reports supporting capital planning, repair prioritization, and asset management programs.

5. Mechanical Engineer/Inspector

   ZI Engineering

   Sep 2023 — May 2026 · New York, NY

   Mayors Office of Management and Budget. Performed as a Team Lead and Inspector Conducted inspections and assessments of mechanical systems of various government owned facilities in New York City as part of sub-consultant to Gannett Fleming/STV. The data generated is the primary source used in establishing the capital needs for existing facilities. Following mechanical systems were inspected: • Steam Boilers, Hot Water Boilers, Steam Boilers and Modular Boilers. • Steam Heating System: Piping, Insulation, Terminal Unit Thermostatic Traps, F&T Traps, Heating Coils in ductwork, Boiler Feed System, Steam Condensate Return Pumping System. • Hydronic Heating System: Piping, Insulation, Pumps, Heat Exchangers. • Chilled Water System: Chillers, Pumps, Central Station Air Handlers, Fan Coil Units, Cooling Towers, Chilled water piping, Insulation. • DX Split System. • Roof Top Units and Packaged Terminal A/C Units. • Ventilation System: Heating and Ventilating units, Exhaust Fans, Ductwork, Dampers. • Climate Control System: BMS System, Pneumatic System, Electric System. • Domestic Hot & Cold-Water System. • Drain/Waste/Storm System. • Kitchen – Sinks, Piping, Hood, Hood Exhaust System, and Fire Suppression System. • MAU’s. • Wet and Dry Sprinkler system, Standpipe, Fire System. • Swimming Pool – Filters, Heaters, Piping & Pumps. • Plumbing Fixtures. • Reviewed repair and maintenance cost estimates based on deficiencies reported and suggested corrections for budgeting purposes.

6. Project Design Engineer

   ZI Engineering

   Aug 2022 — Dec 2025 · New York, United States

   Design of Sprinkler System and Plumbing Systems for Bergen Point Waste Treatment Plant - Lab Expansion Project. Design of new/existing Sprinkler Systems, Plumbing Systems, RO Systems, conduct field surveys, make hydraulic calculations, develop mechanical coordination meetings, Arch/Eng. meetings, Cut and List material using Computer Added Design Software, assist in management of assigned project. Coordinated and managed team of engineers and drafters to deliver the product on time. Provided full project schedule using MS Project. Dewatering projects and design for multiple school construction sites (Iannelli Construction Co., Inc): • Perform complex surveys and investigations on site condition. • Communicate and coordinate with architects, engineers, and the general public regarding dewatering project. • Design dewatering plan. • Investigate issues and complaints and recommend actions and alternatives. • Submit and expedite documentation for necessary government permits.

7. Construction Manager

   ZI Engineering

   May 2020 — Sep 2020 · New York City Metropolitan Area

   Construction Management and Quality Assurance Services as part of sub-consultant to Gannett Fleming/STV for Emergency Response Project for New York City School Construction Authority (NYCSCA). Daily duties included: • Identify and focus on critical issues related to constructability including associated costs and logistical issues. • Lead and manage complex project with limited lead's involvement. • Ensure timely and accurate completion of reports, i.e., costs to complete, billings, subcontractor payments, change order preparation and resolution, contracts, etc. • Ensure that jobs are completed according to schedule and meet all goals. • Oversee the change order process to ensure the extras presented to the client get approved and are fair. • Establish performance goals. • Develop, maintain ongoing client, architect, subcontractor, and relationships at the appropriate level. • Work collaboratively with outside parties (I.e., the design team, etc.) to accomplish client goals. • Coordinate all subcontractors. • Ensure quality assurance is maintained from the start to the final closeout of the project following the construction contract and applicable drawings and specifications. • Comply with government policies and protocols related to COVID. • Provide timely notification on all issues and concerns related to the construction contractor’s compliance with the contract and or ability to achieve the expected level of quality, adhere to cost, maintain project schedule, product submittals, and use of unacceptable/unapproved products, requests for information (RFIs).

8. Firestopping Inspector/Engineer

   ZI Engineering

   Jun 2018 — Sep 2018 · New York City Metropolitan Area

   The Port Authority of NY & NJ / Skanska / Walsh / Bureau Veritas. The LaGuardia Airport renovation project. Provided inspection for fire stopping of Mechanical, Plumbing, Electrical, Fire Sprinkler penetrations as well as at Drywall, Masonry, and Curtain Wall joints in accordance with approved design documents and standards. Communicate in writing and verbally with architects, engineers and the general public regarding inspections Investigate violations, issues and complaints and recommend actions and alternatives Record results of inspections and write reports

9. Construction Manager

   ZI Engineering

   May 2017 — Oct 2017 · New York City Metropolitan Area

   II. Various Projects - Town of Hempstead Daily duties included: • Planning, organizing, directing, controlling, and evaluating construction projects from start to finish according to schedule, specifications and budget. • Preparing and submitting construction project budget estimates. • Planning and preparing construction schedules and milestones, and monitoring progress against established schedules. • Preparing contracts and negotiating revisions, changes and additions to contractual agreements with architects, consultants, clients, suppliers and subcontractors. • Developing and implementing quality control programs. • Representing your company on matters such as business services and union contracts negotiation. • Preparing progress reports and issuing progress schedules to clients. • Supervising the activities of subcontractors and subordinate staff.

10. Mechanical Engineer/Inspector

    ZI Engineering

    Nov 2016 — Jun 2024 · Greater New York City Area

    Performed inspection and assessments of mechanical systems of various school facilities in New York City for NYCSCA as part of sub-consultant to Gannett Fleming/STV, WSP (Parson Brinckerhoff). The data generated is the primary source used in establishing the capital needs for existing school facilities. Following mechanical systems were inspected: • Steam Boilers, Hot Water Boilers, Steam Boilers and Modular Boilers. • Steam Heating System: Piping, Insulation, Terminal Unit Thermostatic Traps, F&T Traps, Heating Coils in ductwork, Boiler Feed System, Steam Condensate Return Pumping System. • Hydronic Heating System: Piping, Insulation, Pumps, Heat Exchangers. • Chilled Water System: Chillers, Pumps, Central Station Air Handlers, Fan Coil Units, Cooling Towers, Chilled water piping, Insulation. • DX Split System. • Roof Top Units and Packaged Terminal A/C Units. • Ventilation System: Heating and Ventilating units, Exhaust Fans, Ductwork, Dampers. • Climate Control System: BMS System, Pneumatic System, Electric System. • Domestic Hot & Cold-Water System. • Drain/Waste/Storm System. • Kitchen – Sinks, Piping, Hood, Hood Exhaust System, and Fire Suppression System. • Science Labs – Sinks, Lab Hood, Eye Wash, Emergency Shower, MAU’s. • Wet and Dry Sprinkler system, Standpipe, Fire System. • Swimming Pool – Filters, Heaters, Piping & Pumps. • Plumbing Fixtures. (Cycle 20••••21) Complex assessments for NYC ACS and NYC DDC •Perform complex building condition surveys •Communicate in writing and verbally with architects, engineers and the general public regarding building inspections •Investigate violations, issues and complaints and recommend actions and alternatives •Record results of inspections and write reports •Provide quality assurance

11. Mechanical Inspector

    ZI Engineering

    Oct 2016 — Oct 2018 · New York City Metropolitan Area

    Facility Condition Assessment Survey to assess conditions of twenty-three childcare facilities located in various boroughs of New York City. The New York City Administration for Children's Services (ACS) is in the process of renewing the long-term leases of these facilities housed in privately owned properties. The project objective is to evaluate the physical conditions of these facilities and provide documents in support of the lease renewal negotiations with the goal of securing safe, low-maintenance, licensable day care facilities. • Performed assessment of mechanical systems of the facilities • Prepare detailed assessment report in the form of narrative and photos of observed deficiencies. • Provide recommendations for repair and/or rehab, develop scope of work and estimated quantities of repair/upgrades. Various Projects for private and public clients (SCA, NYCHA, etc) •Perform condition assessments of mechanical systems including plumbing, HVAC, electrical and other systems in accordance with inspection protocols, state and local regulations • Perform special inspections in accordance with state and local regulations •Engage in document research, investigations, studies, examinations and testing •Provide mechanical engineering technical support to engineering team, assist with preparation of technical specifications, engineering plans and contract bid packages as well as prepare estimates, obtain quotes to procure needed supplies and equipment •Review contract drawings and specifications; review submittals and transmittals •Work on change orders, work loads, scope of work and other documentation •Design mechanical systems for commercial and residential buildings •Provide quality assurance for variety of projects

12. Independent Engineer-Consultant - Various Projects

    Freelance, self-employed

    2011 — 2015 · Greater New York City Area

    • Consulted companies throughout various ongoing construction projects in New York. • Ensured compliance with all applicable policies and procedures. • Conducted field surveys of air conditioning, heating, insulation, water distribution. • Wrote reports for respective supervisors about the mechanical conditions. • Notified supervisors of damages or repairs needed to be made.

13. Construction Engineer

    Co. Ltd. “Dom”

    Aug 2010 — Aug 2011 · Alexandrov/Moscow, Russian Federation

    • Created full technological process of construction projects. • Performed observation, inspections, consultation, and testing for continuing projects construction. • Assisted the contractors and interpreted the engineering information, complete sheets, and plans. • Used empirical and calculated data to predict operation parameters and performance. • Ensured that the installation process of mechanical, plumbing, fire suppression systems (automatic valves, fire pimps, jockey pumps, sprinkler heads, fire alarm controls) and electrical systems were carried in accordance with the drawings, specifications, revised shop drawings and submittals. • Prepared and delivered department workload. • Supervised buildings and workers on projects. • Checked if final product meets quality standards. • Worked with Product Manager to design and develop new products. • Conducted inspections.

14. Engineering Manager

    Co. Ltd. “AutoGermes”

    Jan 2010 — Aug 2010 · Moscow, Russian Federation

    Planned and conducted of exhibitions Technology of Sales Advised and provided customers with information about the terms of sales and product mix of the company Identified, hired, developed and recognized technical staff Provided technical direction to direct and indirect reports. Integrated third-party manufactured products into service operations in accordance with distribution and development partnerships Managed pre-sale preparation and provided tests of vehicles

15. Mechanical Engineer

    Co. Ltd. “HydroMachService”

    Jun 2007 — Jan 2010 · Novotroitsk, Russian Federation

    • Operated, repaired, maintained heavy hydraulic equipment, power plants, boilers, and ventilation systems • Developed, discussed and agreed on the projects with engineering team • Reviewing preliminary plans, field survey, inspections and measuring performance • Planed, managed and executed the completion of various consulting assignments and projects • Approved and supervised projects • Prepared and delivered department workload • Supervised workers on projects • Checked if product meets quality standards

16. Assistant Mechanical Engineer / Intern

    A.M.O. “ZIL” (Open Joint Stock Moscow Company "Plant named after Likhachev")

    Jun 2006 — Aug 2006 · Moscow, Russian Federation

    • Operated, repaired, maintained heavy manufacturing equipment, power plants, pneumatic and ventilation systems • Conducted and reviewed preliminary plans, field survey, inspections and measuring performance • Assisted with planning, managing and executing the completion of various consulting assignments and projects • Assisted with approving and supervising

Education

• City University of New York City College

  Master’s Degree · Mechanical Engineering

  2015 — 2017

• The Moscow State Agroengineering University

  Master’s Degree · Mechanical Engineer in Automobile Industry

  2005 — 2010

Skills

• Finite Element Analysis
• Project Reviews
• McQuay Duct Sizer
• Hydraulics
• Industry standards
• Quality Control
• Plumbing
• Fire Protection
• ANSYS Fluent
• Design and Operation of Technological Equipment
• HVAC
• Electronic Systems in Mobile Machines
• RSMeans Software for cost estimates
• Matlab
• Proposal Preparation
• Manufacturing
• Engineering Training
• Test Procedures
• Diesel Generators
• Client Visits
• Project Leadership
• Multitasking
• Site Investigation
• Management
• Construction Engineering
• Collaborative Decision-making
• McQuay Pipe Sizer
• Customer Service
• AutoCAD
• Computer-Aided Design (CAD)
• Commercial Construction
• Microsoft Office
• Construction
• Inspection
• Engines
• Mechanical, Electrical, and Plumbing (MEP)
• ANSYS
• Problem Solving
• Management of Technical Systems
• Construction Document Review